YARP Devices

There are three separate concerns related to devices in YARP:

Implementing specific drivers for particular devices
Defining interfaces for device families
Implementing network wrappers for interfaces

The first step, creating drivers for particular devices, is obvious; every robotics project needs to interface with hardware somehow.

The second step, defining interfaces for families of devices, is important in the longer term. If you change your camera or your motor control board, how much of your code needs to change too? If you view your devices through well thought out interfaces, the impact of device change can be minimized.

The third step, network wrappers, is important to give flexibility. You can scale up your computing cluster, or isolate hardware devices that don't play well together, or have specific OS dependencies etc.

A driver in YARP is just a C++ class. Interfaces are simply abstract base classes. And network wrappers are just special cases of devices that happen to use network resources to satisfy their interfaces. Let's look at some examples to make this clear.

Framegrabber interfaces

We call devices that produce a stream of images "framegrabbers" for historical reasons. There are a number of interfaces associated with framegrabbers. Here's one, IFrameGrabberImage: (taken from FrameGrabberInterfaces.h in the YARP source code)

class yarp::dev::IFrameGrabberImage {
public:
    virtual bool getImage(yarp::sig::ImageOf<yarp::sig::PixelRgb>& image) = 0;
    virtual int height() const = 0;
    virtual int width() const = 0;
};

Notice that IFrameGrabberImage doesn't do anything itself – it just declares methods to get an image and image dimensions. There are several classes in YARP that implement this interface (in other words, they inherit from it and define the methods). One example is DragonflyDeviceDriver. This interfaces with a Point Grey digital camera, using different libraries on different operating systems. It implements several interfaces; here are just two of them:

Since you may not have any hardware devices available to you right now, let's make a "fake" framegrabber that implements the IFrameGrabberImage interface:

class FakeFrameGrabber : public IFrameGrabberImage {
private:
    int w, int h;
public:
    FakeFrameGrabber(int w, int h) : w(w), h(h) {
    }
 
    virtual bool getImage(yarp::sig::ImageOf<yarp::sig::PixelRgb>& image) {
    Time::delay(0.5);  // simulate waiting for hardware to report
    image.resize(w,h);
    image.zero();
    return true;
    }
 
    virtual int height() const {
    return h;
    }
 
    virtual int width() const {
    return w;
    }
};

All this does is return blank images roughly every half second, but it does indeed implement the IFrameGrabberImage interface.

We very nearly have a YARP device driver. Sometimes we want to be able to create devices flexibly, based on a configuration file, or without having to worry about where their header file is. For these purposes, YARP requires that:

All device drivers inherit from the "DeviceDriver" class.
All device drivers implement an open and close method.
Device drivers should be using no hardware resources before open is called or after close is called. YARP in return will promise that open will be the first method called after construction, and that if open returns false no other methods will be called before destruction. The open method takes a configuration object which can contain arbitrary properties.

This is quite straightforward to do for our fake framegrabber:

class FakeFrameGrabber : public IFrameGrabberImage,
             public yarp::dev::DeviceDriver {
private:
    int w, int h;
public:
    FakeFrameGrabber() {
    h = w = 0;
    }
 
    bool open(int w, int h) {
    this->w = w;
    this->h = h;
    return w>0 && h>0;
    }
 
    virtual bool open(yarp::os::Searchable& config) {
    // extract width and height configuration, if present
    // otherwise use 128x128
    int desiredWidth = config.check("w",Value(128)).asInt32();
    int desiredHeight = config.check("h",Value(128)).asInt32();
    return open(desiredWidth,desiredHeight);
    }
 
    virtual bool close() {
    return true; // easy
    }
 
    virtual bool getImage(yarp::sig::ImageOf<yarp::sig::PixelRgb>& image) {
    Time::delay(0.5);  // simulate waiting for hardware to report
    image.resize(w,h);
    image.zero();
    return true;
    }
 
    virtual int height() const {
    return h;
    }
 
    virtual int width() const {
    return w;
    }
};

Now we have a good YARP device driver (even if it is fake). We've chosen to require that the width and height of images be greater than zero, which seems reasonable.

Creating and configuring the new device

We can create, configure, and use our device directly, without any bureaucracy:

FakeFrameGrabber fakey;
fakey.open(640,480);
ImageOf<PixelRgb> img;
fakey.getImage(img);
...

If we're smart, we'd make as much of our code as possible depend just on the interface IFrameGrabberImage, so that we can reuse it or substitute in a different framegrabber later:

// creation and configuration -- depends on specific device type
FakeFrameGrabber fakey;
fakey.open(640,480);
IFrameGrabberImage& genericGrabber = fakey;
// from here on, we only care that our device implements IFrameGrabberImage
ImageOf<PixelRgb> img;
genericGrabber.getImage(img);
...

This is a standard software engineering technique for minimizing unnecessary coupling between modules.

Suppose we want to go further, and let the framegrabber we use be controlled by a command line option. So it could either be our FakeFrameGrabber, or a real device like DragonflyDeviceDriver or PicoloDeviceDriver (another framegrabber), or RemoteFrameGrabber (a proxy for a framegrabber device on another machine).

YARP comes with a helper for doing this. It maintains a simple database of the drivers you have compiled and available. You can see this database by running "yarpdev", which tells you something like:

...
Here are devices listed for your system:

Device <dragonfly>
   documented by the C++ class DragonflyDeviceDriver
   Wrapped for the network by <grabber>

Device <fakeFrameGrabber>
   documented by the C++ class FakeFrameGrabber
   Wrapped for the network by <grabber>

Device <grabber>
   documented by the C++ class ServerFrameGrabber
   Does not need a network wrapper.
...

We see a "dragonfly" listing associated with the DragonflyDeviceDriver class – "dragonfly" is this devices common name to which it is referred to in configuration files, command line options, etc.. There is also a "fakeFrameGrabber" listing associated with a FakeFrameGrabber class – this is in fact a more elaborate version of the fake framegrabber we've been working on, for testing purposes. We can ignore it for now. There is also a "grabber" device listed, with is a network wrapper that works for all framegrabber devices.

You can instantiate any device listed here from your code as follows:

#include <yarp/dev/PolyDriver.h>
#include <yarp/dev/FrameGrabberInterfaces.h>
#include <yarp/sig/Image.h>
using yarp::dev::PolyDriver;
using yarp::dev::IFrameGrabberImage;
using yarp::sig::ImageOf;
using yarp::sig::PixelRgb;
...
PolyDriver dd("dragonfly");
if (!dd.isValid()) {
  printf("Dragonfly not available\n");
  exit(1);
}
IFrameGrabberImage *grabber;
dd.view(grabber);
if (grabber!=NULL) {
  printf("*** Device can supply images\n");
  ImageOf<PixelRgb> img;
  if (grabber->getImage(img)) {
    printf("*** Got a %zux%zu image\n", img.width(), img.height());
  }
}

Just replace the name "dragonfly" with the device you want.

If we want to be able to create a FakeFrameGrabber through the same mechanism, we need to add a factory for it to the device driver database. Here's how:

DriverCreator *fakey_factory =
   new DriverCreatorOf<FakeFrameGrabber>("fakey","grabber","FakeFrameGrabber");
Drivers::factory().add(fakey_factory); // hand factory over to YARP

The name "fakey" is an arbitrary common name we pick. The name "grabber" gives a network wrapper for this device ("" if there is none). The class name "FakeFrameGrabber" is recorded to let the user know where to look for documentation on this device.

Now we can do:

PolyDriver dd("fakey");
IFrameGrabberImage *grabber;
dd.view(grabber);
if (grabber == nullptr) { exit(1); } // failed
// from here on, we only care that our device implements IFrameGrabberImage
ImageOf<PixelRgb> img;
grabber->getImage(img);
...

This form is calling FakeFrameGrabber::open without any configuration information set up. To pass in configuration options, we do:

Property config("(device fakey) (w 640) (h 480)");
PolyDriver dd(config);
...

Once we've reached this point, some fun things become possible. For example:

Property config("(device grabberDual) (subdevice fakey) (w 640) (h 480)");
PolyDriver dd(config);
...

This will create and configure a FakeFrameGrabber, then wrap it up in a ServerFrameGrabber so that it can be accessed on the network.

Find out available devices and their parameters

To have a full lost of devices and check their parameters follow the instruction at the page yarpdev: the standard YARP device utility

More advanced topics: true nesting of device properties; calibration objects.

Table of Contents

YARP Devices

Framegrabber interfaces

Creating and configuring the new device

Find out available devices and their parameters